CA-802M Series
NMS-Type Media Converter
Description
Product Line
Home > Product Line > Fiber Media Converter Solution > Media Converter Network Management
Media Converter Network Management
CA-802M, a 10/100M adaptive fast Ethernet media converter with network management system, supports Web interface management, remote Telnet management & software upgrade, and serial port management & software upgrade, which can monitor working status and configure the modes of the local and the remote device.
Features
• Graphic management interface based on WEB address and SNMP protocol;
• Supporting LFP (Link Fault Pass Through) of the local and remote;
• The network interfaces of the NMS proxy module and NMS media converter module support the auto-sense of MDI-MDIX
• Compliance with IEEE 802.3u 100BASE-FX/TX and IEEE802.3 10BASE-T;
• Supporting IEEE 802.1Q VLAN;
• Supporting 10/100M auto sensed, full/half-duplex auto sensed;
• Supporting the transmission of packets of 1600 bytes at the maximum;
• Supporting Quality of Service (QoS), and he transmission of VoIP packets;
• Supporting Spanning Tree Protocol (STP) to form a redundant network;
• Supporting hot swapping in the rack;
• Card type can be plug into both desktop box and the rack;
• Extremely low power consumption, low heat, reliable and stable performance, and long lifetime;
• Options in multimode dual fiber, single mode and single mode single fiber
• Options in different types of optical interfaces, such as SC, ST, etc.
• Supporting LFP (Link Fault Pass Through) of the local and remote;
• The network interfaces of the NMS proxy module and NMS media converter module support the auto-sense of MDI-MDIX
• Compliance with IEEE 802.3u 100BASE-FX/TX and IEEE802.3 10BASE-T;
• Supporting IEEE 802.1Q VLAN;
• Supporting 10/100M auto sensed, full/half-duplex auto sensed;
• Supporting the transmission of packets of 1600 bytes at the maximum;
• Supporting Quality of Service (QoS), and he transmission of VoIP packets;
• Supporting Spanning Tree Protocol (STP) to form a redundant network;
• Supporting hot swapping in the rack;
• Card type can be plug into both desktop box and the rack;
• Extremely low power consumption, low heat, reliable and stable performance, and long lifetime;
• Options in multimode dual fiber, single mode and single mode single fiber
• Options in different types of optical interfaces, such as SC, ST, etc.
Technical Indexes
Access mode |
10/100Mbps |
Operating temperature |
-10ìC ~ +55ìC |
Storage temperature |
-40ìC ~ +70ìC |
Power selection |
AC220V/AC110V / DC-48V |
Power consumption |
2W |
Dimensions |
140 mm (W) * 110 mm (D) * 40 mm (H) (internal power supply) |
Optical Features/
Multi-mode |
Applicable fibers: 50/125, 62.5/125, 100/140レm |
Multi-mode 2km or multi-mode 5km |
Transmitting power: -20 ~ -14 dB |
Receiving sensitivity: < -31 dBm |
|
Transmission distance: 0~ 2km or 0~5km |
|
Optical connector: SC (standard)/FC (optional)/ST (optional) |
|
Optical port: dual fiber |
|
Wavelength: 850nm/1310nm |
|
Single mode |
Applicable fibers: 9/125, 8.3/125, 8.7/125レm or 10/125レm |
Single mode 20km |
Transmission distance: 0~20km |
Transmitting power: -15~-8 dBm (dual fiber), -14~-8 dBm (single fiber) |
|
Receiving sensitivity: < -34 dBm (dual fiber), < -33 dBm (single fiber) |
|
Optical connector: SC (standard)/FC (optional)/ST (optional) |
|
Optical port: single fiber/dual fiber |
|
Wavelength: 1310nm/1550nm (single fiber); 1310 nm (dual fiber) |
|
Single mode 40km |
Transmission distance: 0~40km |
Transmitting power: -10~-5 dBm (dual fiber), -9~-5 dBm (single fiber) |
|
Receiving sensitivity: < -36 dBm (dual fiber), < -33 dBm (single fiber) |
|
Optical connector: SC (standard)/FC (optional)/ST (optional) |
|
Optical port: single fiber/dual fiber |
|
Wavelength: 1310nm/1550nm (single fiber); 1310 nm (dual fiber) |
|
Single mode 60km |
Transmission distance: 0~60km |
Transmitting power: >-5~0 dBm (dual fiber), -6~0 dBm (single fiber) |
|
Receiving sensitivity: < -36 dBm |
|
Optical connector: SC (standard)/FC (optional)/ST (optional) |
|
Optical port: single fiber/dual fiber |
|
Wavelength: 1310nm/1550nm (single fiber); 1310 nm (dual fiber) |
|
Single mode 80km |
Transmission distance: 0~80 km (please use an appropriate optical attenuator if the distance is less than 15 km) |
Transmitting power: >-8~-2 dBm (dual fiber), -3~3 dBm (single fiber) |
|
Receiving sensitivity:< -36 dBm |
|
Optical connector: SC (standard)/FC (optional) |
|
Optical port: single fiber/dual fiber |
|
Wavelength: 1310nm/1550nm (single fiber); 1550 nm (dual fiber) |
|
Single mode 100km |
Transmission distance: 0~100 km (please use an appropriate optical attenuator if the distance is less than 15 km) |
Transmitting power: >-6~-1 dBm (dual fiber), -4~0 dBm (single fiber) |
|
Receiving sensitivity: < -38 dBm |
|
Optical connector: SC (standard)/FC (optional) |
|
Optical port: dual fiber |
|
Wavelength: 1550 nm |
|
Single mode 120km |
Transmission distance: 0~120 km (please use an appropriate optical attenuator if the distance is less than 15 km) |
Transmitting power: >-5~0 dBm (dual fiber), -3~1 dBm (single fiber) |
|
Receiving sensitivity: < -38 dBm |
|
Optical connector: SC (standard)/FC (optional) |
|
Optical port: dual fiber |
|
Wavelength: 1550 nm |
Typical Application of Media Converter in overall Network Connection in centralized management mode Connection in point-to-point mode Order Information
Media Converter Series with Network Management |
||
Model |
Specifications |
|
Dual fiber, Series |
||
CA-802MM |
Network management board, SNMP, RJ45/RS232 |
|
CA-802MP |
Supporting network management, 10/100M, multi-mode, 2 km, SC/ST, module type |
|
CA-802M |
Supporting network management, 10/100M, multi-mode, 2 km, SC/ST, aluminum alloy, stand alone |
|
CA-802MP |
Supporting network management, 10/100M, single mode, 20/40/60/100 km, SC, module type |
|
CA-802M |
Supporting network management, 10/100M, single mode, 20/40/60/100 km, SC, aluminum alloy, stand alone |
|
Single mode single fiber Series |
||
CA-S802MP-20 |
Supporting network management, 10/100M, single mode, single fiber, bi-directional, 20/40/60/80 km, SC, module type |
|
CA-S802M-20 |
Supporting network management, 10/100M, single mode, single fiber, bi-directional, 20/40/60/80 km, SC, aluminum alloy, stand alone |
|
